(2) Monitoring/changing the word device (D100) values
(3) Displaying the error message
1.
2.
4. From GOT screen creation up to the test
4.5 Checking whether data has been properly transferred to the GOT
1.
To perform addition on the value of D100,
touch a [Numeral Increase] switch.
2.
When the [Set Numeral] switch is touched,
the D100 value is set.
1.
Power OFF the training machine and power
OFF the PLC.
2.
The error message appears in the system
alarm.
1
2
3
4
5
6
4 - 31