Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 249

O
Object
This is the general term for the targets which are placed on a screen and operate according to the PLC device
memory (bit, word).
Object gesture function
This is a function to scroll or zoom in and out the displayed contents of objects with gestures such as a flick.
Operating ambient temperature
This is the operating ambient temperature range after the device power is switched ON.
Since the PLC is normally installed in a control panel, the temperature mentioned above means in the control
panel.
Pay attention to the fact that part of the GOT is in the control panel and part is outside the control panel, and those
parts have different operating ambient temperature. (See below.)
Display section: 0 to 50 C
Other than display section: 0 to 55 C
Operating condition
Only when a setting condition is satisfied, an operation is performed.
The condition type includes "Ordinary", "ON", "OFF", "Range", and "Multiple Bit Trigger".
Operating System (OS)
Generally, this means the basic software for computers, etc. This is the software for running programs created by
the user.
In the PLC, the OS is for running the sequence programs and in the GOT, the OS is the program for operating the
screen or touch switches as set and is supplied by Mitsubishi Electric.
Ordinary trigger
A trigger that constantly updates the data display.
Output (Y)
This signal outputs PLC calculation results to external devices with ON/OFF.
The device name is expressed with Y.
The PLC output module has relays, triacs, and transistors.
Ordinary write
To update the contents displayed when there is any change in the data, rather than using a
trigger in the display or input state as the trigger for data display or input.
See "Trigger write".
Overlap window
A pop-up screen that appears over the base screen.
Up to five overlap window screens can be displayed on one base screen.
P
Package data
This data consists of a project, standard system application, extended system application, communication
driver, and special data.
Parts
Parts comprise figures and are used with the "parts display" and "parts movement" functions.
The figures that can be used in parts include text and image data.
Parts movement (locus display)
This operation erases the parts (figures) displayed just before, moves the parts to the specified new position
(according to the coordinate device value), and displays it there.
With parts movement, it is also possible to remain the parts displayed just before the movement.
Such display is called parts locus display.
Password
The GOT2000 has three types.
Screen security password
Functional operation security password
Data transfer security password
1
2
3
4
5
6
App - 65