Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 31

(4) Bus connection
Bus connection is a method using an extension connector of a base unit to connect a GOT (connection by I/O
bus).
This connection type enables the fastest response to a PLC CPU among all GOT connection types.
By occupying one stage of the extension base unit, up to maximum five GOTs can be connected.
*1 QCPU (High Performance model or models in higher class)
QCPU
(5) CC-Link IE Controller Network, MELSECNET/H, or MELSECNET/10 connection
The GOT is connected to a CC-Link IE Controller Network system, MELSECNET/H network system , or
MELSECNET/10 (PLC to PLC) network system as a normal station.
The cyclic data of the CC-Link IE Controller Network, MELSECNET/H, or MELSECNET/10 (PLC to PLC
network) and the devices of PLC CPUs in the same network can be monitored.
GOT GOT
Optical loop system
QCPU
GOT
(6) CC-Link connection
GOT can be connected to the network as an intelligent device station of the CC-Link System.
The cyclic data of the CC-Link System and devices of the PLC CPU on the master or local station can be
monitored.
CC-Link module
Remote I/O station
QCPU
Connection to multiple GOTs is possible.
GOT GOT
Maximum distance: 37 m
Coaxial bus system
QCPU
QCPU
GOT
1.6 Applicable connection type between the GOT and the PLC CPU
GOT
QCPU
GOT
Partner manufacturer
Local station
1. What is the GOT?
1
*1
2
3
4
GOT
5
6
1 - 19