Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 151

(From previous page)
(4) Create Go To Screen Switch which displays Window Screen No. 1.
Copy and paste the Go To Screen Switch to Base Screen No. 2 created above.
Make the settings of display and operation for the copied Go To Screen Switch as follows:
Next Screen tab
Text tab
When setting is done, click the [OK] button.
(5) Create Go To Screen Switch for Window Screen No. 2.
Copy and paste the Go To Screen Switch created for Base Screen No. 1 on to Base Screen No. 2.
Make the settings of display and operation for the pasted Go To Screen Switch as follows:
Next Screen tab
Text tab
When setting is done, click the [OK] button. The Go To Screen Switch setting has been configured.
4.
7.
4.
6.
5.
5.
8.
6.
7.
8.
Setting item
Screen Type
Next Screen
Screen No.
Text
Setting item
Next Screen
Screen No.
Text
Set the text to be displayed in the switch as
follows:
[Font] : Outline Gothic
[Text Size] : 12
[Text Color] : Black
Set the display position of text as follows:
[Display Position]: Center
[Alignment]: X:
Y:
The position of the texts used for switches
and lamps can be selected among the
following display positions:
Up
Left Switch figure Right
Center
Down
Enter the following to [Text].
"Alarm screen"
Check that [OFF=ON] is selected.
Click the button to complete the
settings.
Overlap window 1
Sub screen
5. Drawing fundamentals
5.10 System alarm settings
1
2
3
4
5
6
Setting
Fixed
1
Setting
Fixed
1
Base screen
5 - 69