Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 54

(3) Setting of Screen Switch Device
The device for switching the screens displayed on GOT is set.
(The settings made here can be changed later.)
Refer to section 4.2.3 for details on screen switching device settings.
P O I NT
P O I
Up to 32 characters can be entered as a project name, regardless of whether they are one-byte or two-byte
characters.
4 - 6
4. From GOT screen creation up to the test
4.2 Screen creation
1.
When the left screen appears, the screen
switching device is set as follows.
Base Screen
Overlap Window1
Overlap Window2
Overlap Window3
Overlap Window4
Overlap Window5
Superimpose Window1 : - (no setting)
1.
Superimpose Window2 : - (no setting)
Dialog Window
Click the
2.
The left screen is displayed.
Confirm the settings.
Click the
2.
3.
Base screen1 is created.
The screen is ready for drawing.
: GD100
: GD101
: - (no setting)
: - (no setting)
: - (no setting)
: - (no setting)
: - (no setting)
button.
button.