Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 37

(GOT)
Run lamp
Run Stop
Data 123
Touch.
(GOT)
Run lamp
Run Stop
Data
(GOT)
Run lamp
Run Stop
Data 200
P O I N T
P O I N
The display and operation of the cursor and key window for numerical input can be changed through settings.
(1) Display or non-display of the cursor, and key window
• When establishing conditions or switching screens, the cursor and key window are displayed, and when
establishing the operating conditions, the cursor and window key are not displayed.
• The key window is displayed on touch input and not displayed at pressing the [Enter] button.
(2) Cursor key operations
The input order can be set to the multiple numerical input.
10 0
0
0
0
0
Input fixation
For the operation setting methods of cursor and key window for numerical input, refer to the GT Designer3
(GOT2000) Screen Design Manual.
100
0
0
Move cursor to the
next input field.
5.
To change the value of the word device "D10",
touch the numerical input on the GOT.
6.
Input the numerical value on the key window to
be displayed.
To store the value, touch the [Enter] button.
7.
The input numerical value is reflected
(D10: 123 → 200), and the key window is
closed.
2. GOT operation
2.1 Summary of operation
1
2
3
4
5
6
2 - 3