Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 211

Appendix.2.1 Overall procedure
This section describes the overall procedures for data transfer to the GOT using a data storage.
1) CoreOS
2) BootOS
3) Package data
Data to be transferred
*1 BootOS and package data cannot be transferred to the same memory card.
*2 Check the available space of the data storage.
The available space of BootOS and system applications can be checked in [Write to Memory Card] or [Write Option] of GT
Designer3.
1.
Personal computer → Data storage
Write each type of data (CoreOS, BootOS, or package data) installed in a personal computer to a data storage with
GT Designer3.
For how to write each type of data to the data storage, refer to the GT Designer3 (GOT2000) Screen Design
Manual.
P P O O I I N N T
To directly open the package data from the data storage, select [Directly from the memory card] for [GOT Startup
Method] tab on the [Memory Card Write] of the Communicate with Memory Card dialog.
For how to directly open the package data from the data storage, refer to the GT Designer3 (GOT2000) Screen
Design Manual.
2.
Data storage → GOT
The following two methods are available for installing or writing each data (CoreOS, BootOS, or package data) to
the GOT.
•
How to install while the GOT is powered ON
For the installation method, refer to the GT Designer3 (GOT2000) Screen Design Manual.
•
How to install package data using the utility (data control function) of the GOT
For the installation method, refer to the GOT2000 Series User's Manual (Utility).
Data storage
SD card
( )
USB memory
*1 *2
Package data
(SD card)
Package data
(SD card)
Drive C
• CoreOS
• BootOS
• Package data
Drive A
• Package data
Drive B
Drive E
Drive F
Drive G
• Package data
1
2
3
4
5
6
App - 27