Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 202

Example) When the alarm of error code 460 occurs and the alarm is reset before the cause is eliminated
Error date and time
Jun. 1, 2013 11:30 803 Transient error
Jun. 1, 2013 10:25 460 Communication unit error
Error date and time
Jun. 1, 2013 11:30 803 Transient error
Jun. 1, 2013 10:25 460 Communication unit error
Error date and time Comment
Jun. 1, 2013 12:00
Jun. 1, 2013 11:30 803 Transient error
Jun. 1, 2013 10:25 460 Communication unit error
The alarm status of GOT errors does not turn "Restored" even after the alarm causes are eliminated. To
turn the status to "Restored", execute any one of the following operations.
Error
occurrence
Eliminate the cause of the alarm of
the GOT, a controller, or a network.
• Turning the alarm status of a selected error to "Restored"
Using a touch switch, turn the alarm status of an selected error to "Restored".
Error date and time Comment
Jun. 1, 2013 11:30 402 A communication timeout has occurred. Occurred
Jun. 1, 2013 10:25 70 Battery voltage low or equipment fault
Jun. 1, 2013 09:10 803 Transient error
• Using the system information, turning the alarm status of all the GOT errors to "Restored"
By turning on the GOT Error Reset signal (System signal 1-1.b13), turn the alarm status of all the GOT
errors to "Restored".
Error date and time Comment
Jun. 1, 2013 11:30 402 A communication timeout has occurred. Occurred
Jun. 1, 2013 10:25 70 Battery voltage low or equipment fault
Jun. 1, 2013 09:10 803 Transient error
• Using a utility, turning the alarm status of all the GOT errors to "Restored"
Using the alarm display (system) utility, turn the alarm status of all the GOT errors from "Occurred" to
"Restored".
App - 18
Comment
Reset
Comment
460 Communication unit error
Cause
elimination
Alarm status
Occurred
Occurred
Alarm status
Occurred
Occurred
GOT2000 Series User's Manual (Utility)
Alarm status
Occurred
Occurred
Reset the alarm.
(Turn on the System signal 1-1.b13.)
Alarm status
Occurred
Restored
Alarm status
Occurred
Occurred
Restored
Error date
and time
Jun. 1, 2013
Jun. 1, 2013
Jun. 1, 2013 803 Transient error
The alarm status of the GOT error remains "Occurred"
even if the cause of the alarm is eliminated.
Error date and time Comment
Jun. 1, 2013 11:30 402 A communication timeout has occurred. Restored
Reset
Jun. 1, 2013 10:25 70 Battery voltage low or equipment fault
Jun. 1, 2013 09:10 803 Transient error
Key code: FFB9h
Error date and time Comment
Jun. 1, 2013 11:30 402 A communication timeout has occurred. Restored
Reset
Jun. 1, 2013 10:25 70 Battery voltage low or equipment fault
Jun. 1, 2013 09:10 803 Transient error
Turn on the System
signal 1-1.b13.
The status of the GOT
error turns "Restored".
After the reset, the same
alarm occurred again.
The date and time of occurrence
displayed show the date and time
when the alarm was detected again
after the reset.
Alarm
Comment
status
402 A communication timeout
Occurred
has occurred.
70 Battery voltage low or
Restored
equipment fault
Restored
Alarm status
Occurred
Occurred
Alarm status
Occurred
Occurred