(1) System settings for GOT
The GOT type to be used and the color are set.
(2) Communication Settings
The connection method for the device to be connected to GOT is set.
(The settings made here can be changed later.)
For details on communication settings, refer to section 4.2.2.
(Next page)
1.
When the left screen appears, set the GOT
type and the color as follows.
GOT Type: GT27**-S (800x600)
1.
2.
After the selection is made, click the
2.
3.
The left screen is displayed.
Confirm the settings.
Click the
3.
1.
When the left screen appears, set
manufacturer and the device to be connected
as follows.
1.
Manufacturer: MITSUBISHI
Controller Type: MELSEC-Q/QS, Q17nD/
2.
2.
Click the
3.
When the left screen appears, set the
connection I/F as follows.
3.
I/F: Standard I/F(Ethernet): Multi
4.
Click the
4.
4. From GOT screen creation up to the test
button.
button.
M/NC/DR, CRnD-700
button.
button.
4.2 Screen creation
1
2
3
4
5
6
4 - 3