Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 224

(From previous page)
(2) Installing the CoreOS to the GOT from the data storage
1.
Install the data storage that has been removed from the personal computer to the GOT.
2.
Power on the GOT.
3.
The confirmation message for installing the CoreOS appears.
To install the CoreOS, touch the screen for two seconds or longer.
To abort the installation of the CoreOS, power off the GOT.
4.
When the installation of the CoreOS is completed, the completion message appears.
Touch the screen to restart the GOT.
5.
Write the required package data to the restarted GOT.
P O I N T
P O I N
• When installing the CoreOS from the SD card, close the SD card cover properly after inserting the card to start
the installation.
• When using the SD card as a drive A, in which the CoreOS has been installed, delete the CoreOS in the SD
card or format the SD card before use.
App - 40
6.
Click
7.
After writing to the data storage is completed,
remove the data storage from the personal
computer.
Refer to the following to install the CoreOS to
the GOT.
6.
button to install the CoreOS.