54
Operating Modes
Further data for the I/O module can then be specified in a parameterization dialog
box corresponding to the selected module.
1.
Double-clicking the I/O module to be parameterized opens the
parameterization dialog.
The parameterization dialog displays a list of module-specific parameters that are
listed in the table below.
2.
You can double-click the individual parameter values to edit or select them
from a list.
Parameters for All Operating Modes
Table 35: General Parameter Data
Parameters
Number of
preamble bytes
HART telegram
repetitions
Channel 0/1
+ diagnostics
+ Filter time [ms]
*)
Default value
Manual
Version 1.0.2
750-482/000-001 2AI 4-20mA HART NAMUR NE43
Value
Description
Number of "preamble bytes";
5
*)
to 20
The value must be increased in the event
of communications problems.
Number of retries for HART telegram
transmissions;
0
to 10
*)
The value must be increased in the event
of communications problems.
• lock
• Diagnostics for channel 1 / 2 is disabled.
*)
• release
• Diagnostics for channel 1 / 2 is enabled.
10
*)
to 1280
Filter time for input channel
1 / 2
WAGO I/O System 750