Cage Clamp; Figure 4: Cage Clamp ® Connectors; Table 7: Legend For Figure "Cage Clamp ® Connectors - WAGO 750-482/000-001 Manual

WAGO I/O System 750
750-482/000-001 2AI 4-20mA HART NAMUR NE43
3.2.3

CAGE CLAMP

Figure 4: CAGE CLAMP
Table 7: Legend for Figure "CAGE CLAMP
Channel Designation
1
2
-
Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
® Connectors
® Connectors
Connector Function
−HART 1 1
+HART 1 3
−HART 2 5
+HART 2 7
S 4
S 8
Connectors"
®
Sensor 1: Connection HART +
Sensor 1: Connection HART −
Sensor 2: Connection HART +
Sensor 2: Connection HART −
Common shield connection of the
channels
Device Description
Manual
Version 1.0.2
21