Table 36: Parameter Data For The Hart Variables; Table 37: Parameter Data For Acyclic Access - WAGO 750-482/000-001 Manual

WAGO I/O System 750
750-482/000-001 2AI 4-20mA HART NAMUR NE43
Parameters for the HARD Variables

Table 36: Parameter Data for the HART Variables

Parameters
HART value
channel 0/1
PV =
SV =
TV =
QV =
Default value
*)
Parameters for Acyclic Access

Table 37: Parameter Data for Acyclic Access

Parameters
HART
Tool Routing
via DP-V1
*)
Default value
No Acyclic Access in PROFINET
For PROFINET, acyclic access to the HMDs is not currently implemented
because there is no DTM in contract to PROFIBUS.
Value
1×2 HV:
• PV
*)
• SV
• TV
• QV
2×2 HV:
• PV, SV
*)
• PV, TV
• SV, TV
• PV, QV
• SV, QV
• TV, QV
3×2 HV:
• PV, SV, TV *)
• PV, SV, QV
• PV, TV, QV
• SV, TV, QV
4×2 HV:
• PV, SV, TV, QV *)
first variable
second variable
third variable
fourth variable
Value
• disabled
• enabled *)
Description
1 HART variable channel 1 / 2;
• 1 variable
st
• 2 nd variable
• 3 rd variable
• 4 th variable
2 HART variables channel 1 / 2;
• 1 and 2 variable
st nd
• 1 st and 3 rd variable
• 2 nd and 3 rd variable
• 1 st and 4 th variable
• 2 and 4 variable
nd th
• 3 and 4 variable
rd th
3 HART variables channel 1 / 2;
• 1 st , 2 nd and 3 rd variable
• 1 st , 2 nd and 4 th variable
• 1 st , 3 rd and 4 th variable
• 2 , 3 and 4 variable
nd rd th
4 HART variables channel 1 / 2;
• 1 st , 2 nd , 3 rd and 4 th
(Primary Variable),
(Secondary Variable),
(Tertiary Variable),
(Quaternary Variable)
Description
• Acyclic access to the HMDs
(HART Master Devices) is disabled
• 12-byte mailbox for acyclic access
is enabled.
Operating Modes 55
variable
Manual
Version 1.0.2