File - Elnec MEMprog2 User Manual

List of hot keys
<F1>
<F2>
<F3>
<F4>
<F5>
<Alt+F5>
<F6>
<F7>
<F8>
<F9>
<Alt+Q>
<Alt+X>
<Ctrl+F1>
<Ctrl+F2>
<Ctrl+Shift+F2>

File

Menu File is used for source files manipulation, settings and viewing directory, changes
drives, changes start and finish address of buffer for loading and saving files by binary,
MOTOROLA, MOS Technology, Intel (extended) HEX, Tektronix, ASCII space, JEDEC,
and POF format. The menu commands for loading and saving projects are located in this
submenu too.
File / Load
Analyse file format and loads the data from specified file to the buffer. You can choose the
format desired (binary, MOTOROLA, MOS Technology, Tektronix, Intel (extended) HEX,
ASCII space, JEDEC and POF). The control program stores a last valid mask for file listing.
You can save the mask into the config. file by command Options / Save options.
The reserved key <F3> will bring out this menu from any menu and any time.
Note for special x16 formats:
Intel HEXx16 is Intel Hex file format with 16 bits data word for TMS320F devices.
Motorola HEXx16 is Motorola file format with 16 bits data word for TMS320F devices.
Checking the check box Automatic file format recognition tells program to detect file format
automatically. When program can't detect file format from one of supported formats, the
binary file format is assumed.
When the check box Automatic file format recognition is unchecked program allows user
to manually select wished file format from list of available file formats on panel Selected file
format. Default set is from Options / General options in panel Load file format at tab File
options.
Attention: Program doesn't know recognize files in ASCII Hex format automatically, it
recognizes them as binary. So download files in ASCII Hex format with disabled option for
automatic file format recognition.
Help Calls Help
Save Save file
Load Load a file into the buffer
Edit Viewing/editing of buffer
Select/default Target-device selection from 10 last selected devices list
Select/manual Target-device selection by typing device/vendor name
Blank Blank check
Read Reads device's content into the buffer
Verify Compares contents of the target device with the buffer
Program Programs target device
Exit without save Terminates the Pg4uw
Exit and save Terminates the Pg4uw and saving settings too
Displays additional information about current device
Erase Fill's the buffer with a given value
Fill's the buffer with random values.
93
Pg4uw