Options - Elnec MEMprog2 User Manual

Programmer / Calibration test
Command executes test of programmer's calibration values using 48 Pins Calibration test
POD, Type I, which is optional accessories for BeeHive8S, BeeHive204, BeeHive4+,
BeeHive4, BeeProg2, BeeProg+ and BeeProg. The order number: 70-0438.
There are tested voltage levels of TTL drivers, VCCP, VPP1 and VPP2 voltages on each pin
of ZIF socket. Result of the Calibration Test can be saved into file and/or printed (for next
use).
Programmer / Common notes
Serial numbering
Table bellow is showing differences between old and new serial numbering of programmers:
new numbering
050-00xxx
050-01xxx
050-02xxx
050-03xxx

Options

The Options menu contains commands that let you view and change various default settings.
Options / General options
General options dialog allows user to control and set variety of Pg4uw program options. The
options can be saved to Pg4uw configuration file when closing Pg4uw application, or anytime
by command Options / Save options.
File options
File options page allows you to set options for erase buffer before loading, auto-reload of
current file and recognition method of file formats for loaded files.
Erase buffer before loading option sets erasing buffer (with desired value) automatically
before loading of data file.
In group When current file is modified by another process can be set mode of reloading of
actually loaded (current) file. There are three choices:
• Prompt before reloading file
• Reload automatically
• Ignore change scanning of current file
There are three situations when file modification is tested:
• switching to the control program from another application
• selecting the device operation Verify or Program
• when repeat of last device operation is selected in dialog "Repeat?"
Load file format allows to set mode of file format recognition for loading files. When
automatic file format is selected, program analyses format of loading file and test file for each
old numbering
050-xxx
950-xxx
850-xxx
750-xxx
137
Pg4uw