Elnec MEMprog2 User Manual page 49

• For all supported devices see actual Device list on www.elnec.com.
I.C. Tester
• Static RAM: 6116..624000
Programming speed
Device
27C010
AT29C040A
AM29F040
PIC16C67
PIC18F452
AT89C52
PIC16F876A
PIC12C508
Conditions:
SOFTWARE
• Algorithms: only manufacturer approved or certified algorithms are used. Custom
algorithms are available at additional cost.
• Algorithm updates: software updates are available approx. every 4 weeks, free of charge.
• Main features: revision history, session logging, on-line help, device and algorithm
information
Device operations
• standard:
• intelligent device selection by device type, manufacturer or typed fragment of part name
• blank check, read, verify
• program
• erase
• configuration and security bit program
• illegal bit test
• checksum
• security
• insertion test
• contact check
• ID byte check
• special
• auto device serial number increment
• statistic
• count-down mode
Buffer operations
• view/edit, find/replace
• fill, copy, move, byte swap, word/dword split
• checksum (byte, word)
• print
Operation
programming and verify
programming and verify
programming and verify
programming and verify
programming and verify
programming and verify
programming and verify
programming and verify
P4, 2,4GHz, USB 2.0 HS, Windows XP, Pg4uw 2.11
49
Mode Time
in ZIF 24 sec
in ZIF 32 sec
in ZIF 69 sec
in ZIF 10 sec
in ZIF 7 sec
in ZIF 17 sec
ISP 5 sec
ISP 3 sec
SmartProg2