Software Setup - Elnec MEMprog2 User Manual

Setup
The programmer package contains a CD with the control program, useful utilities and
additional information. The permission to freely copy the content of the CD is granted in order
to demonstrate how ELNEC programmers work.
For programmers connected through USB (LPT) port, control program requires correctly
installed USB driver
We recommended install software before connecting programmer to PC to avoid
unwanted complication during installation.

Software setup

Insert delivered CD to your CD drive and install program starts automatically (if not, run
setup.exe). Install program will guide you through the installation process and will do all the
necessary steps before you can first run the control program.
Step 1.
Click on "Software installation PROGRAMMERS" button.
Step 2.
Select language and than click on "OK" button.
79