Introduction - Elnec MEMprog2 User Manual

ELNEC s. r. o.

Introduction

SEEprog is universal programmer of all serial EEPROM in 8-pin DIL package. SEEprog
programs EEPROM with interface IIC, SPI and Microwire, and also specialty as for example
digital thermometers. The programmer supports LV (3.3V) devices too.
SEEprog interfaces with the IBM PC Pentium compatible or higher, portable or desktop
personal computers. Programmer allows you to directly connect to your PC through any
standard parallel (printer) port - no special interface card is needed.
SEEprog programmer is driven by an easy-to-use control program with pull-down menu, hot
keys and on-line help. Selecting of device is performed by its class, by manufacturer or
simply by typing a fragment of vendor name and/or part number.
Standard device-related commands (read, blank check, program, verify, erase) are boosted
by some test functions, and some special functions (autoincrement).
All known data formats are supported. Automatic file format detection and conversion during
load of file.
The rich-featured autoincrement function enables to assign individual serial numbers to
each programmed device - or simply increments a serial number, or the function enables to
read serial numbers or any programmed device identification signatures from a file.
The software also provides a lot of information about programmed device. As a special, the
drawings of all available packages, explanation of chip labeling (the meaning of prefixes
and suffixes at the chips) for each supported chip are provided.
For SEEprog programmer are available DIL to SOIC socket converters.
74