Wing Fold Cylinder Installation - Landoll Brillion WFPD38-52 Operator's Manual

Wing Fold Cylinder Installation

1. Check to make sure that the Cylinder Ball Joints are
free to rotate.
2. Cylinder port are front facing. See Figure 2-8.
3. Place the base end of the 5 x 42 Hydraulic Cylinder
(WFP38-46) or 5-1/2 x 42 Hydraulic Cylinder
(WFP50-52) between each pair of Center Frame
Lugs. Insert bushings into frame Lugs. Secure with
1-1/4-7 x 5-1/4 Bolts and Locknuts.
4. Block Cylinder Rod ends up from the frame to allow
for rod movement when purging the Hydraulic Circuit.
Bolt,1-1/4-7 x 5-1/4
F-661-0321
TABLE OF CONTENTS
Hydraulic Cylinder 5 x 42 (WFP38-46)
Hydraulic Cylinder 5-1/2 x 42 (WFP50-52)
Figure 2-8: Wing Fold Cylinder Installation
Locknut,1-1/4-7
Bushing
Front
2-9