Landoll Brillion WFPD38-52 Operator's Manual page 50

Float Lock Kit - Optional
1. Place Wing Float Stops into the Center Frame Wing
Guide Slot. See Figure 2-31.
2. Place a Float Stop Spacer on each side of the Wing
Float Stops.
3. Place a Wing Float Stop Plate against each Float
Lock Spacer. Insert 3/8-16 x 3-1/2 Bolts from the
inside outward. Secure with 3/8-16 Flange Locknuts.
Bolt,3/8-16 x 3-1/2
Wing Guide Slot
2-36
TABLE OF CONTENTS
Wing Float Stop Plate
Float Lock Spacer
Figure 2-31: Float Lock Kit
Wing Float Stop
Wing Float
Stop Plate
Flange
Locknut,3/8-16
F-661-0321