Wing Fold Support Assembly - Landoll Tilloll 877 Operator's Manual

ASSEMBLY INSTRUCTIONS

Wing Fold Support Assembly

1. See Figures 3-5 for 30' models, assemble the wing
supports to the RH and LH wing frames using 5/8 x
4-11/16 x 5-1/2 u-bolts and 5/8 locknuts
Supports Placement 30'" on page
2. See Figures 3-6 for 35' models, assemble the wing
supports to the RH center frame using 5/8 x 4-11/16
x 5-1/2 u-bolt, rear, 5/8 x 4-11/16 x 4-1/2 u-bolt, front
and 5/8 locknuts and to the RH wing frame using 5/8
x 2 bolts and lock nuts
Placement 35' RH" on page
3-8
(See "Wing
2-22.).
(See "Wing Supports
2-23.).
3. See Figures 3-7 for 40' models, assemble the wing
supports to the RH center frame using 5/8 x 4-11/16
x 7-3/4 u-bolts and 5/8 locknuts and to the RH wing
frame using 5/8 x 2 bolts and 5/8 lock nuts
"Wing Supports Placement 40' RH" on
page 2-24.).
for
(See
F-1072-0320