Scraper Adjustment
NOTE
Notched Roller Wheel Scrapers are optional and
reversible.
Notched Roller Wheel Scrapers are designed to keep the
Notched Roller Wheels from building up with moist soil
during operation. Adjustment of the Scrapers will be
necessary as the Roller Wheels and/or the Scrapers wear.
Center Frame
F-661-0321
TABLE OF CONTENTS
Scraper Tube
Bracket
Scraper
1/4"
Wing Frame
Notched Wheel
Figure 3-10: Scraper Adjustment
1. Unfold and Lower Pulverizer on a level surface.
2. Push Notched Wheels against welded Roller Axle
End Stops and add Clamp End Spacers if needed.
See Figures 4-9 and 4-10.
3. Adjust Scrapers as needed to obtain a 1/4" gap
between the Scraper and Notched Wheel. See
Figure 3-10. Scrapers are 1/4" thick and can be used
to set the 1/4" gap.
Scraper Mount
Bracket
Notched Wheel
Scraper Mount
Scraper
1/4"
3-11