Wing Rest Installation
1. Install the RH and LH Wing Rest to the RH and LH
Wing Frame 4-Hole Plate located under the Wing
Frame Tube. Secure with 5/8-11 x 7-1/2 Bolts, Flat
Washers and Flange Locknuts. See Figure 2-16.
Flat Washer,5/8
Locknut,5/8-11
2-18
TABLE OF CONTENTS
Wing Rest
Bumper Pad
Flat Washer,5/8
Locknut,5/8-11
Wing Rest
Bumper Pad
Figure 2-16: Wing Rest Installation
2. Attach the Wing Rest Bumper Pads onto the top of the
RH and LH Wing Rest with 3/8-16 x 1-1/2 Flat Head
Screws and Locknuts.
Screw,3/8-16 x 1-1/2
Locknut,3/8-16
Wing Rest LH
Bolt,5/8-11 x 7-1/2
Flat Washer,5/8
Screw,3/8-16 x 1-1/2
Locknut,3/8-16
Wing Rest RH
Bolt,5/8-11 x 7-1/2
Flat Washer,5/8
RH Wing Frame
LH Wing Frame
F-661-0321