Hydraulic Fold Installation - Landoll Brillion Zone Commander 2511 Operator's Manual

ASSEMBLY INSTRUCTIONS

Hydraulic Fold Installation

1. Pin cylinder rod to wing bracket using clevis pin.
2. Install 90° elbow with restrictor into each port of
hydraulic cylinders (See Figure 3-16.)
3. Install Hose 1 from hydraulic manifold to the base
end of the left hydraulic cylinder.
4. Install Hose 2 from hydraulic manifold to the rod end
of the left hydraulic cylinder.
3-18
5. Install Hose 3 from hydraulic manifold to the rod end
6. Install Hose 4 from hydraulic manifold to the base
7. Install coupling Hoses 5 & 6 from the front of the
Figure 3-16: Hydraulic Fold Installation
of the right hydraulic cylinder.
end of the right hydraulic cylinder.
hydraulic manifold to the 1/2 male couplers. Connect
the coupler fittings to the tractor.
F-758R0