Landoll Brillion WFPD38-52 Operator's Manual page 22

Drawbar Jack, Hose Support and
Manual Storage Canister
Installation
1. Assemble the Jack Mount to the Jack with the 1/2-13
x 1-1/2 Bolts and Locknuts in the four upper holes.
Attach the Jack to the drawbar by slipping the Jack
sleeve into the Drawbar sleeve and inserting the Jack
3/4 Pin with Chain.
2. Attach the Hose Support to the Drawbar with 5/8-11 x
2-1/4 Bolt, 5/8 x 2 x 3/8 Washer and Flange Locknut.
3. Install the Manual Storage Cannister to the Drawbar
Mount with Hose Clamp.
Hose
Support
Bolt,
5/8-11 x 2-1/4
Washer,
5/8 x 2 x 3/8
2-8
TABLE OF CONTENTS
Pin w/Chain,3/4
Bolt,1/2-13 x 1-1/2
Flange Nut,5/8-11
Figure 2-7: Additional Drawbar Assembly
Locknut,1/2-13
Jack
Jack
Mount
Manual Storage
Canister
Hose Clamp
F-661-0321