Table 18: Status Byte - WAGO 750 Series Manual

WAGO I/O System 750
750-1491 2AI Resistor Bridge (Strain Gauge)

Table 18: Status Byte

Bit 7
RegCom
Underrange
Overrange
User
Underrange
User
Overrange
Underflow
Overflow
General Error
RegCom
Bit 6 Bit 5
General
Overflow Underflow
Error
Measurement underrange
0: The field-side input voltage is above the measurement range lower limit.
1: The field-side input voltage is below the measurement range lower limit.
Measurement overrange
0: The field-side input voltage is above the measurement range upper limit.
1: The field-side input voltage is below the measurement range upper limit.
User limiting value underrange
0: The field-side input voltage is above the measurement range lower limit
configured by the user.
1: The field-side input voltage is below the measurement range lower limit
configured by the user.
User limiting value overrange
0: The field-side input voltage is above the measurement range upper limit
configured by the user.
1: The field-side input voltage is below the measurement range upper limit
configured by the user.
Underflow
0: No underflow
1: Underflow of the measuring range
Overflow
0: No overflow
1: Overflow of the measuring range
General error / Internal error
0: No error present, or bit 0 (measurement underrange), bit 1 (measurement
overrange), bit 4 (underflow) or bit 5 (overflow) is not set.
1: General error present; bit 0 (measurement underrange), bit 1
(measurement overrange), bit 4 (underflow) or bit 5 (overflow) is set.
Internal error present (ADC error) bit 0 (measurement underrange), bit 1
(measurement overrange), bit 4 (underflow) or bit 5 (overflow) is not set.
Register communication
0: Register communication is inactive (normal mode)
1: Register communication is enabled
Status Byte
Bit 4 Bit 3 Bit 2
User User
Over- Under-
range range
Process Image 35
Bit 1 Bit 0
Over- Under-
range range
Manual
Version 1.0.0