Scaling - WAGO 750 Series Manual

WAGO I/O System 750
750-1491 2AI Resistor Bridge (Strain Gauge)
Table 34: "Menu Items "Input X"
Parameter
Diagnosis:
Measuring range
overflow
Diagnosis:
Measuring range
underflow
Diagnosis: Upper
user limit value
exceeded
Diagnosis: Lower
user limit value
undershot
Upper user limit
Lower user limit
Factory setting
*)
setting only for
1)
setting only for
2)
7.3.2.3

Scaling

Under the "Scaling" menu item, you can enable and modify the user scaling for
each input. You select the corresponding input via the tabs in the application
area.
Factory scaling is always activated according to the measuring range selected.
Enabling user scaling allows gain and offset values to be adjusted
The scaling process is performed on a input basis; therefore, before the save
operation, be sure to select the corresponding input.
Setting Option / Description
This parameter can be used to switch diagnostics on/off for
a measuring range overflow.
Off
On *)
This parameter can be used to switch diagnostics on/off for
a measuring range underflow.
Off
On
*)
This parameter can be used to switch diagnostics on/off for
an upper user limit value exceed.
Off
On *)
This parameter can be used to switch diagnostics on/off for
a lower user limit value undershot.
Off
On *)
[Input field]
−32768 ...
32767
*)
[Input field]
−32768 ...
*)
32767
" "
Input U x menu item
d
" "
Input U x menu item
ref
Commissioning
Measuring range overflow diagnosis is
switched off.
Measuring range overflow diagnosis is
switched on.
Measuring range underflow diagnosis is
switched off.
Measuring range underflow diagnosis is
switched on.
Diagnosis: upper user limit value exceed
diagnosis is switched off.
Diagnosis: upper user limit value exceed
diagnosis is switched on.
Lower user limit value undershot
diagnosis is switched off.
Lower user limit value undershot
diagnosis is switched on.
The upper user limit value can be entered
in the input field.
The lower user limit value can be entered
in the input field.
65
Manual
Version 1.0.0