Measurement Computing Data Translation DT3034 User Manual page 96

• Continuous digital input takes full advantage of the capabilities of the DT3034 boards. In
this mode, you enter all 16 digital input lines as channel 32 of the analog input channel list
using software. This mode is programmed through the A/D subsystem. Using this mode,
you can specify a clock source, scan mode, trigger source, trigger acquisition mode, and
buffer for the digital input operation. Refer to
digital input lines for a continuous digital input operation.
• Dynamic digital output (supported by the DataAcq SDK only) is useful for synchronizing
and controlling external equipment and allows you to output data to two dynamic digital
output lines each time an analog input value is acquired. This mode is programmed
through the A/D subsystem; refer to
page 72 for more information on specifying
page 72 for more information.
Principles of Operation
95