Supported Device Driver Capabilities; Data Flow And Operation; Options - Measurement Computing Data Translation DT3034 User Manual

Data Flow and Operation Options
Single-Value Operation Support
SupportsSingleValue
Simultaneous Single-Value Output
Operations
SupportsSetSingleValues
Continuous Operation Support
SupportsContinuous
Continuous Operation until Trigger
SupportsContinuousPreTrigger
Continuous Operation before & after Trigger
SupportsContinuousPrePostTrigger
Waveform Operations Using FIFO Only
SupportsWaveformModeOnly
Simultaneous Start List Support
SupportsSimultaneousStart
Supports Programmable Synchronization
Modes
SupportsSynchronization
Synchronization Modes
SynchronizationMode
Interrupt Support
SupportsInterruptOnChange
Output FIFO Size
FifoSize
Auto-Calibrate Support
SupportsAutoCalibrate
a. All 16 bits of the DIO lines are assigned to A/D input channel 32. While the DIN subsystem itself
is incapable of continuous operation, continuous DIN operation can be performed by specifying
channel 32 in the channel-gain list of the A/D subsystem and starting the A/D subsystem.
Table 9: DT3034 Data Flow and Operation Options
DT3034 A/D
Yes
Yes
Yes
Yes
Yes
D/A DIN DOUT
Yes Yes Yes
a
Yes Yes
Yes
4K

Supported Device Driver Capabilities

C/T QUAD
Yes
113