Measurement Computing Data Translation DT3034 User Manual page 125

Chapter 8
The DT3034 boards are calibrated at the factory and should not require calibration for initial
use. We recommend that you check and, if necessary, readjust the calibration of the analog
input and analog output circuitry on the DT3034 boards every six months.
The DT3034 Calibration Utility is provided for calibrating DT3034 boards.
Note: Ensure that you installed the DT3034 Device Driver prior to using the DT3034
Calibration Utility. Refer to
This chapter describes how to calibrate the analog input and output subsystems of DT3034
boards using the DT3034 Calibration Utility.
124
page 30 for more information on loading he device driver.