Measurement Computing Data Translation DT3034 User Manual page 59

Chapter 5
You can verify the operation of a DT3034 board using the Quick DataAcq application. Quick
DataAcq allows you to do the following:
• Acquire data from a single analog input channel or digital input port
• Acquire data continuously from one or more analog input channels using an oscilloscope,
• Measure the frequency of events
• Output data from a single analog output channel or digital output port
• Output pulses either continuously or as a one-shot
• Save the input data to disk
This chapter describes how to install and run the Quick DataAcq application.
58
Install the Board and Load the Device
Driver (see
Attach and Configure the Screw Terminal
Panel (see
(see
Verify the Operation of the Board
strip chart, or Fast Fourier Transform (FFT) view
Chapter 2 starting on page
Chapter 3 starting on page
Wire Signals
Chapter 4 starting on page 39)
(this chapter)
23)
33)