Testing Single-Value Analog Input - Measurement Computing Data Translation DT3034 User Manual

Chapter 5

Testing Single-Value Analog Input

To verify that the board can read a single analog input value, do the following:
1. Connect a voltage source, such as a function generator, to analog input channel 0
2. In the Quick DataAcq application, choose Single Analog Input from the Acquisition
3. Select the appropriate DT3034 board from the Board list box.
4. In the Channel list box, select analog input channel 0.
5. In the Range list box, select the range for the channel.
6. Select Differential.
7. Click Get to acquire a single value from analog input channel 0.
60
(differential mode) on the DT3034 board. Refer to
connect a differential analog input.
menu.
The default is ±10 V.
The application displays the value on the screen in both text and graphical form.
page 46 for an example of how to