Measurement Computing Data Translation DT3034 User Manual page 25

Chapter 2
Note: All DT3034 boards are factory-calibrated and require no further adjustment prior to
installation. If you are using the DT3034 board and decide later to recalibrate it, refer to
123
24
Install the Board and Load the Device
Attach and Configure the Screw Terminal
Panel (see
(see
Verify the Operation of the Board
(see
for instructions.
Driver (this chapter)
Chapter 3 starting on page
Wire Signals
Chapter 4 starting on page 39)
Chapter 5 starting on page 57)
33)
page