Table of Contents
Advertisement
148/233
Bosch Rexroth AG | Electric Drives
System Switching
9.1.3
Operation and Navigation
Rexroth IndraMotion MTX 09VRS | Application Description
and Controls
Fig.9-8:
Channel wait states
The channel wait states are displayed by pressing key <F2> or in a "tool tip" by
moving the mouse over the symbol. The "tool tip" appears for approx. 10 sec‐
onds.
Operation is carried out using F-keys, arrow keys and the <Enter> key.
A channel window is always selected. The F-keys act on this channel window.
The channel is highlighted using the arrow keys or by clicking the mouse.
If there is not enough space to display channels, extra F-keys are displayed;
these can be used to quickly switch between the blocks.
<F8> is used to switch between the default and the compact display.
Pressing the <Enter> key or <F9> transfers the focused channel as the active
channel ("machine mode, machine status area"); the display immediately
switches to "machine" mode.
Advertisement
Table of Contents
