Operation Mode Switches - Bosch Rexroth IndraControl XM21 Operating Instructions Manual

Bosch Rexroth AG
Device description
LED Color
s Red/orange/green
DIA1 Red/orange/green
DIA2 Red/orange/green
DIA3 Red
DIA4 Red
STA Red/orange/green
ERR Red/orange/green
BT Red/orange/green
D Red/orange/green
E Red/orange/green
Tab. 12-2: LED block of 10
The displayed device states are firmware-dependent and described
in the functional description of the respective control system
(Rexroth IndraLogic XLC IndraMotion MLC 14 VRS, Functional De-
scription, R911341700).

12.1.3 Operation mode switches

The operation mode switch is positioned on the higher located area of the con-
trol housing.
36/61
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Function
Sercos status
Used as feedback for the operation mode switch
Basic diagnostics by the system
Currently booting
Currently booting
STOP/READY/RUN
Error status (warning, error)
Boot status
Onboard S20: Diagnostics S20 bus
Onboard S20: Error or warning of S20 devices
Controls
DOK-CONTRL -IC*XM2*****-IT03-EN-P