Table of Contents
Advertisement
Application Description | Rexroth IndraMotion MTX 09VRS
9
System Switching
9.1
Channel Dialog Box
9.1.1
Application
Position of the Channel Dialog Box
in the User Interface
9.1.2
General Structure of the Channel Dialog Box
The channel dialog box serves for 2 purposes:
●
Switching between operation and display channels
●
Displaying the selected channel information of all the channels of a control
system (channel overview).
Channels that have been hidden using the configuration are not shown.
Fig.9-1:
Channel dialog box in the user interface
The Channel dialog box is an application with its own F-key assignment.
The menu and the title line are hidden.
The Channel dialog box is retrieved by pressing the <OP6> "system" key.
The M-keys act as "global M-keys" on the channel that is displayed in the ma‐
chine status area (active channel).
Depending on the number of channels, 2 types of display are possible.
If more channels exist than can be displayed in the default setting, a compact
display is also offered.
Electric Drives
| Bosch Rexroth AG
and Controls
145/233
System Switching
Advertisement
Table of Contents
