Application Description | Rexroth IndraMotion MTX 09VRS
5.2.3
Technology Display
Display Contents
Column Selection
Fig.5-5:
Coordinate systems
The Technology display is used to show feed and spindle information. A max‐
imum of 8 spindles per channel is supported.
Fig.5-6:
Technology display
The columns and variants are selected using the variant editor of the options
dialog box. Variants with the following column data can be defined here.
●
Program value
●
Setpoint
●
Override
●
Maximum override
●
Actual value
●
Gear level
●
Spindle position
●
Spindle power
●
Spindle torque
●
Spindle group
Electric Drives
| Bosch Rexroth AG
and Controls
General Operation and Visualization
31/233