Table of Contents
Advertisement
96/233
Bosch Rexroth AG | Electric Drives
Programming
7.4.2
Operation
Value Entry
Start Editing Mode
Transferring a Value
Rexroth IndraMotion MTX 09VRS | Application Description
and Controls
Data type
D-corrections (.dct)
Zero offsets (.zot)
Placements (.pmt)
Fig.7-6:
Table templates
Table Names
The data type of a table can be determined on the basis of the file ending of
the table name.
Data type
D corrections
Zero points
Placements
Fig.7-7:
Table file endings
Navigation and Selection of Cells
To enter a correction value, the desired entry cell of the value first has to be
selected as follows:
●
Click the mouse on the desired cell.
– or –
●
Navigate with the arrow keys until the desired cell is selected.
– or –
●
Navigate using the F-keys (see also
Editor" on page
97).
The selected cell can be recognized by the dark blue background color.
Editing Values
Switching to the editing mode of the selected cell is carried out using one of the
following actions:
●
Entering a value or a character using the keyboard.
– or –
●
Pressing the <Enter> key.
– or –
●
Double-clicking the cell.
The editing mode is indicated by a flashing entry cursor in the corresponding
cell.
An edited value can be transferred using one of the following actions:
●
Pressing the <Enter> key.
– or –
●
Pressing the <Tab> key
– or –
●
Pressing an arrow key.
Template
/database/DC1.dct
/database/ZO1.zot
/database/PM1.pmt
File ending
Dct (D correction table)
Zot (zero offset table)
Pmt (placement table)
chapter "Functional Keys in the Table
Advertisement
Table of Contents
