Table of Contents
Advertisement
Application Description | Rexroth IndraMotion MTX 09VRS
10
Diagnostics
10.1
Diagnostics Display
10.1.1
Overview
Message List (1)
Pressing the OP9 key will activate the diagnostics screen.
The scope of delivery of IndraWorks HMI depends on the control
system installed. While the IndraMotion MTX scope of delivery in‐
cludes preconfigured screens for operating NC machines, the In‐
draLogic control only has the OP9 key for calling the diagnostics
screen.
Fig.10-1:
Basic diagnostics screen
The basic diagnostics screen is divided in four areas:
This area displays the diagnostics messages from the associated control (see
header). The list contains the number of the message, the presence of criteria
analysis data (Ka), the module number of ProVi messages or the channel num‐
ber of MTX messages, the time stamp indicating the time when the message
occurred, and the brief description entered by the user.
Electric Drives
| Bosch Rexroth AG
and Controls
149/233
Diagnostics
Advertisement
Table of Contents
