Table of Contents
Advertisement
116/233
Bosch Rexroth AG | Electric Drives
Tool Management
8.2
Operation
8.2.1
Value Entry
Navigation and Selection of Cells
Editing Values
Start Editing Mode
Transferring a Value
Canceling Value Entry
Conditional Editability
Rexroth IndraMotion MTX 09VRS | Application Description
and Controls
To enter a correction value, the desired entry cell of the value first has to be
selected as follows:
●
Click the mouse on the desired cell.
– or –
●
Navigate with the arrow keys until the desired cell is selected.
The selected cell can be recognized by the dark blue background color.
The selected partial list can be recognized by the light blue background color.
Switching to the editing mode of the selected cell is carried out using one of the
following actions:
●
Entering a value or a character using the keyboard
– or –
●
Pressing the <Enter> key
– or –
●
Double-clicking the cell
The editing mode is indicated by a flashing entry cursor in the corresponding
cell.
An edited value can be transferred using one of the following actions:
●
Pressing the <Enter> key.
– or –
●
Pressing the <Tab> key
– or –
●
Pressing an arrow key.
– or –
●
Clicking the mouse on another cell.
After the value has been transferred, the entered value is written directly to the
NC data table in the NC kernel.
If an incorrect value is entered, an error message is displayed in the
status line and the selected cell remains in the editing mode. The
entry can be cancelled or the value can be rewritten after correcting
the entry.
Edit mode can be cancelled at any time as follows:
●
Pressing the <Esc> key.
The original value is retained in the table.
During the editor/list configuration, it is possible to define the editability of a data
element depending on an additional process variable.
Advertisement
Table of Contents
