Table of Contents
Advertisement
80/233
Bosch Rexroth AG | Electric Drives
Programming
7.2.5
Functions Paste...
Paste - Master Dimension
Shaft/hole
Nominal dimension
Cancel
Paste - NC Block Sequences
New definition
Remove
and Controls
This functions allows for defining tolerances within the system "Hole basis/shaft
basis" according to DIN 7154/5 and the acceptance of the calculated result into
the NC program.
In the dialog box, use <F2> "Help" "Shaft/hole" to differentiate between ma‐
chining of a hole and a shaft.
Input of the nominal dimension in mm in the range from 1 to 500 mm.
Fit
Calculate the potential result by selecting the desired fit tolerance with keys
<F3> to <F6>. The selection relates to the system "Shaft basis/hole basis" ac‐
cording to DIN 7154/5 T1.
Result
Press <F7> "Select result" to see preselection options for "Nominal dimen‐
sion" and, as a sum of the nominal dimension and the tolerance, "Plus devia‐
tion", "Minus deviation" and "Mean deviation".
Exit the process and return to the NC editor using <F8>" Cancel" or via
<ESC>.
Apply
Press the <F9> "Accept" key to copy the preselected result value into the last
cursor position space in the NC program.
Overview
Use this function to insert any number of previously defined blocks into the NC
program. NC block sequences can be created globally or channel-specifically.
If a channel is not specified in the processing NC program, the global NC block
sequences are displayed during the retrieval. If a channel has been specified
in the program, the global NC block sequences of this channel are displayed.
Press the F-key to switch between global and channel-specific NC block se‐
quences. These can also be used if they were generated for another channel.
Functions of the First Level of F-keys
Press <F2> "New NC sequence" to define new block sequences. A dialog win‐
dow opens; enter the designation of the NC sequence into the upper space and
the respective content in the lower space. The content can comprise any num‐
ber of blocks. Language-dependent texts or comments within the designation
and/or the NC block content can also be represented by tokens. Language-
dependent texts or comments within the designation and/or the NC block
content can also be represented by tokens. Instead of specific text for the NC
sequence content or NC sequence denomination, e.: "Z333 (pallet change)" a
language-dependent text can also be entered via token number "%TNxxxx%
e.g.: "Z333 (%TN7%)". Therefore, it is necessary to specify the texts belonging
to the token in the file ...\User\Config\MTXNCSequenceUser_yy.txt (yy=Lan‐
guage recognition, e.g.: EN for English). A maximum of 10 tokens per line are
permitted. The new sequence is always inserted into the designations list be‐
fore the position selected with F6. Confirm the NC sequence by pressing
"OK"; exit the process by pressing "ESC" or "Cancel".
With <F3> "Delete NC sequence", the selected sequence can be deleted. A
safety prompt with the selected NC sequence, including the designation and
contents, appears. Confirm deletion by pressing "OK"; exit the process by
pressing "ESC" or "Cancel".
Rexroth IndraMotion MTX 09VRS | Application Description
Advertisement
Table of Contents
