Main Menu; System Setup Menu - Crestron CNX-DVP4 Operation Manual

Digital Video Processor
24 • Digital Video Processor: CNX-DVP4
•
If the compact flash is not installed or the installed compact flash is blank,
you will be prompted to touch (or click with a cursor) the screen to open the

MAIN MENU.

•
If the compact flash is installed with a loaded program, open Viewport,
connect to the CNX-DVP4 (refer to "Establishing Communication with the
CNX-DVP4" on page 49) and type setup at the >DVP4 (master) prompt,
>CSLAVE CNX-DVP4 (slave) prompt, or >ESLAVE CNX-DVP4
(Ethernet slave) prompt.
Main Menu
The MAIN MENU displays three options: EXIT and Reboot, DVI, RGB and
Video (SETUP, DIAGNOSTICS, OPTIONS, and TRANSLUCENT OBJECTS),
and System (SETUP and DIAGNOSTICS).
The EXIT and Reboot button verifies that all of the setup information has been
saved to the EEPROM, reboots the system, and displays the main page that has been
programmed into your system.
Main Menu

System Setup Menu

The SYSTEM SETUP MENU offers a series of buttons that open additional menus
and displays. After the setup parameters have been set, select the Return button to
return to the MAIN MENU.
Crestron CNX-DVP4
Operations Guide – DOC. 8170A