Advanced Features - Crestron CNX-DVP4 Operation Manual

Crestron CNX-DVP4
Operations Guide – DOC. 8170A
Touchpanel Interface Symbol
7. Click Slot-03: Cresnet: C2Net-Device to open TPS Touchpanel.
8. Double click ID:03: TPS Touchpanel to open symbol.
9. Program the symbol according to the following graphic.
TPS Touchpanel Symbol

Advanced Features

One of the many exciting features of the CNX-DVP4 is its ability to change a video
source on a selected page, instead of using page flips as described in the previous
projects. This is performed using analog joins. For example, you could add buttons
to the VT Pro-e project 1 Logo page that corresponds with all video sources. You
then assign analog join numbers to a video page in project 2 (for example, Page 3:
ST-Tune video 1B) using Video Properties | Joins | Types | Input Selection. The
SIMPL Windows project has a digital to analog symbol and support logic symbols
added and programmed, and additional programming is added to the TPS and
Touchpanel Interface symbols (digital and analog joins). Once the projects are
compiled and loaded in the CNX-DVP4, pressing a video button on the touchpanel
changes the displayed video source without the need of page flips.
Examples
Example projects are available from the Creston FTP site
(ftp://ftp.crestron.com/Examples). Search for:
SIMPLE_PAGE_FLIP_TPS5000.VTZ
SIMPLE_PAGE_FLIP_ANALOG_CHANGES.VTZ
SIMPLE_PAGE_FLIP_MASTER_MODE.ZIP.
Digital Video Processor
Digital Video Processor: CNX- DVP4 • 79