Digital Video Processor
22 • Digital Video Processor: CNX-DVP4
Viewport Setup | Communications Settings
2.
In the "Port Settings" window, select TCP/IP from the Connection Type
field as shown in the following illustration and select Fixed from the IP
Address field.
"Port Settings" Window, TCP/IP Selected
3. Enter the IP address of the configured CNX-DVP4 and click OK. The
Viewport prompt displays either CNX-DVP4 (master) or CslaveDVP4
(slave).
4. Perform any of the diagnostics and features that Viewport provides.
Troubleshooting Communications via Ethernet
You can PING* the CNX-DVP4 from a MS-DOS
a Command Prompt (Windows NT/2000/XP).
The unit should reply and there should be no packet loss.
Crestron CNX-DVP4
®
prompt (Windows 95/98/Me) or
Operations Guide – DOC. 8170A