This chapter describes the equipment you need and the tasks you will
perform to complete an MBX system.
Equipment Required
To complete an MBX system, you need the following equipment:
Overview of the Installation Procedure
The following table lists the things you will need to do to use this board
and tells where to find the information to perform each step.
What you need to do...
Unpack the hardware.
Verify that jumper settings are appropriate for
your application.
Ensure that expansion modules are properly
installed.
Install the MBX board in a chassis and connect
a display console.
1Installation Procedures
Enclosure or chassis with power supply
Display console
Operating system (and/or application software)
Disk drives (and/or other I/O) and connecting cables
Table 1-1. Installation Overview
Refer to...
Unpacking the Board on page 1-2
MBX Jumper Headers on page 6-3
Installing Expansion Modules on page 1-7
Installing the Board on page 1-3
1
1-1