Raising Tray For Access To Pems; Figure 12-2 Sliding Cable Management Tray Over Brackets; Figure 12-3 Cable Management Tray In Lowered Home Position - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Chapter 12 Installing the T3/E3 Cable Management Tray

Figure 12-2 Sliding Cable Management Tray over Brackets

Figure 12-3 Cable Management Tray in Lowered Home Position

Upper notch
Lower notch

Raising Tray for Access to PEMs

You should raise the tray only when necessary to access the Power Entry Modules (PEMs), typically
for replacement or to install a second PEM. Figure 12-4 shows the tray in the raised position.
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Bracket (1 of 2)
Raising Tray for Access to PEMs
Cable management tray
Cable
management
tray
Cisco BPX 8600 Series Installation and Configuration
12-3