Atm E3 Trunk Interface (Bni-E3, Lm-3E3) - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

ATM E3 Trunk Interface (BNI-E3, LM-3E3)

ATM E3 Trunk Interface (BNI-E3, LM-3E3)
Line Rate:
Line Code:
Signal Level:
Framing Format:
Port Interface:
Barrier:
ATM Cell Rate:
Jitter:
ATM Layer Protocol:
Port Alarm Processing:
Line Errors Counted:
Connector:
Max. E3 Cable Lengths:
Indicators:
Cisco BPX 8600 Series Installation and Configuration
31-6
34.368 Mbps 20 ppm, asynchronous
HDB3
CCITT G.703
CCITT G.804, G.832
75 ohm unbalanced
Fully barriered per EN 41003
80,000 cells/sec
per CCITT G.823
per CCITT I.361 with HEC
AIS
Loss of Signal
Remote Alarm Indication
Loss of Framing
BPV
Parity Bit Errors
75 ohm BNC
100 meters. Cabling must not exceed -6 dB/1000 feet at E3 rates.
Cisco supplies cable with a maximum attenuation of 7 dB/1000
feet, but the maximum cable length must not exceed 100 meters.
Card status
Port status
Chapter 31 BPX Node Specifications
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001