Cisco BPX-BXM-155-8DX Installation And Configuration Manual page 85

Chapter 2 BPX Switch Physical Overview
Table 2-1 BPX Switch Plug-In Card Summary (continued)
Card Card Name
BPX-SMF-622 Backcards for BXM-622. The XLR card supports a 1500nm interface
BPX-SMFLR-622
BPX-XLR-622-BC
BPX-SMF-622-2-BC Backcards for BXM-622-2 and BME (BME typically would use SMF-622-2).
BPX-SMFLR-622-2-
BC
BPX-SMFLR-622-2-
BC
BPX-BME Used for multicast connections. Used with SMF-622-2 backcard with port 1
looped to port 2, transmit to receive, and receive to transmit.
BPX-BNI-3-T3 Broadband Network Interface Card (with 3 T3 Ports).
BPX-T3-BC Line Module, used with BNI-T3 for 3 physical T3 ports. (Configured for 3 ports) Back
BPX-BNI-3-E3 Broadband Network Interface Card (with 3 E3 Ports).
BPX-E3-BC Line Module, used with BNI-E3 for 3 physical E3 ports. (Configured for 3 ports). Back
APS Backcards and APS Redundant Backplane
The APS 1+1 feature requires two BXM front cards, an APS redundant frame assembly, and two redundant type BXM
backcards. The types of redundant backcard and backplane sets are:
• BPX-RDNT-LR-155-8 (8 port, long reach, SMF, SC connector)
• BPX-RDNT-LR-622 (single port, long reach, SMF, FC connector)
• BPX-RDNT-SM-155-4 (4 port, medium reach, SMF, SC connector)
• BPX-RDNT-SM-155-8 (8 port, medium reach, SMF, SC connector)
• BPX-RDNT-SM-622 (single port, medium reach, SMF, FC connector)
BPX-RDNT-SM-622-2 (2 port, medium reach, SMF, FC connector)
•
Each of the listed model numbers includes two single backcards and one mini-backplane.
The single backcards and mini-backplane can be ordered as spares. Their model numbers are:
BPX-RDNT-BP= (common backplane for all redundant APS backcards)
BPX-LR-155-8R-BC= (for BPX-RDNT-LR-155-8)
BPX-LR-622-R-BC= (for BPX-RDNT-LR-622
BPX-SMF-155-4R-BC= (for BPX-RDNT-SM-155-4)
BPX-SMF-155-8R-BC= (for BPX-RDNT-SM-155-8)
BPX-SMF-622-R-BC= (for BPX-RDNT-SM-622)
BPX-SMF-622-2R-BC= (for BPX-RDNT-SM-622-2
Service Interface Component Group
BPX-E3-BC Line Module, used with BNI-E3 for 2 physical E3 ports. (Configured for 2 ports) Back
Power Supply Group
48 Volt DC Power Supply
Optional AC Power Supply
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
BPX Switch Major Hardware Component Groups
Cisco BPX 8600 Series Installation and Configuration
Where
Back
Back
Back
Front
Front
2-7