Aps Alarms; Table 28-2 Aps Alarms - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Cisco bpx-bxm-155-8dx: user guide
Table of Contents

Advertisement

Chapter 28
Alarms and Statistics
Table 28-1 Typical Statistics Collected (continued)
Statistics Category
Line statistics
Connection statistics
Frame Relay Port

APS Alarms

The APS alarms are listed in Table 28-2. The list includes the class or state of the alarm, minor, major,
info, or clear.
Statistical alarms are not cleared when a YRED switch occurs. You can clear these stats as appropriate.
On the active line/trunk, alarms (such as LOS and LOF) and statistics (such as error
Note
counters) are supported. On the standby line/trunk, alarms are supported but not statistics.
Summary statistics are not supported on a standby line/trunk.

Table 28-2 APS Alarms

Class
Minor APS Standard Mismatch In a 2 card APS 1+1 configuration, one card is programmed for
Minor APS Card Missing
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Types of Statistics
ATM header error counts
DS3 PLCP error counts
Bdata queue dropped cells.
Various circuit line errors, bipolar violations, frame bit errors, loss of signal,
etc.
Packets transmitted and received
Transmitted and received data bytes
Frame relay frames transmitted/discarded
Frames transmitted with FECN or BECN or DE set
Packets with CLP bit set dropped
Seconds in service
Frames transmitted and received
Bytes transmitted and received
Frames received with CRC or other errors
Frames discarded at the connection ingress
Frames discarded at the connection egress
Frames discarded at the port egress
LMI messages sent or dropped for various errors
DE frames dropped
Name
Description
GR-253 and the other card is programmed for ITUT.
Indicates that either a BXM frontcard or backcard supporting
this APS line is detected as missing by a BXM.
Cisco BPX 8600 Series Installation and Configuration
APS Alarms
28-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents