Card Shelf Configuration; Bpx Switch Major Hardware Component Groups - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Chapter 2 BPX Switch Physical Overview

Card Shelf Configuration

There are fifteen vertical slots in the front of the BPX switch enclosure to hold plug-in cards (see
Figure 2-5).
The middle two slots, slots number 7 and number 8, are used for the primary and secondary Broadband
Controller Cards (BCC).
The right-most slot, number 15, is used to hold the single Alarm/Status Monitor Card.
The other twelve slots, number 1 through number 6 and number 8 through number 14, can be used for
the Network Interface and Service Interface cards.
Figure 2-5

BPX Switch Major Hardware Component Groups

There are four major groups of hardware components in the BPX switch:
•
•
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
BPX Switch Card Shelf Front View
General
purpose BCC/
PRI
card slots
BCC-A
1 2 3 4 5 6 7 8
status status status status status status
port 1 3 port 1 3 port 1 3 port 1 3 port 1 3 port 1 3 LAN LAN
2 2 2 2 2 2
act stby fail act stby fail act stby fail act stby fail act stby fail act stby fail act stby fail
card card card card card card card card
BNI-3/T3 BNI-3/T3 BNI-3/T3 BNI-3/T3 BNI-3/T3 BNI-3/T3 BNI-3/T3 BCC-15 BCC-15
81234 81234 81234 81234 81234 81234 81234 81236 81236
Common Core Components
Network Interface Components
General
BCC/ purpose
SEC
card slots ASM
BCC-B
9 10 11 12 13 14 15
status status status status status status status
port 1 3 port 1 3 port 1 3 port 1 3 port 1 3 port 1 3 alarms
2 2 2 2 2 2
DC ok
ACO
history clear
act stby fail act stby fail act stby fail act stby fail act stby fail act stby fail act stby fail
card card card card card card card
BNI-3/T3 BNI-3/T3 BNI-3/T3 BNI-3/T3 BNI-3/T3 BNI-3/T3 ASM
81234 81234 81234 81234 81234 81234 81237
Cisco BPX 8600 Series Installation and Configuration
Card Shelf Configuration
ASM
major minor
A B
ACO hist
act stby fail
2-5